Intermediate Crimped Wire Mesh
The single intermediate crimped means the weft wire is pre-crimped and the warp wire is directly woven. 2 mesh single intermediate crimped wire mesh including 2 openings per inch. Using 0.8-3.4mm diameter wire, by single intermediate crimped weaving, woven 2 mesh opening for 9-11mm solid particles. This wire diameter and mesh with ratio reasonable, flat surface, strong wear resistance and firm structure.
Weave Patterns:
Material:
Standard materials of flat top crimped wire mesh are low/mild/high carbon steel and stainless steel 201, 202, 304, 316, 321, 410, 430.
Following material available:
Copper: brass, pure copper, phosphor bronze
Aluminum: 1050, 1060, 1100, 5052, 5056
Nickel: pure nickel, nickel alloy, monel
Features:
Intercrimped assure the proper locking of the warp and weft wires;
Superior rigidity and greater stability;
Strong wear resistance and firm structure.
Usage:
Headlight stone guards
Car grille
Barbecue grill
Bird cage
Machine guards
Vibrating Screens
Architecture
Decorative grill
Specifications:
Roll Width: 1m, 1.22m, 1.5m to 4m.
Roll Length: 15m, 30m, 60m to 90m.
| 2Mesh Single Intermediate Crimped Mesh |
| Wire Diameter | Opening | Open Area Rate |
| mm | Inch | mm | Inch | % |
| 3.4 | 0.1338 | 9.3 | 0.3661 | 56.62 |
| 3.0 | 0.1181 | 9.7 | 0.3818 | 58.33 |
| 2.6 | 0.1023 | 10.1 | 0.3976 | 63.24 |
| 2.3 | 0.0905 | 10.4 | 0.4094 | 67.05 |
| 2.0 | 0.0787 | 10.7 | 0.4212 | 70.98 |
| 1.8 | 0.0708 | 10.9 | 0.4291 | 73.66 |
| 1.6 | 0.0629 | 11.1 | 0.4370 | 76.39 |
| 1.4 | 0.0551 | 11.3 | 0.4448 | 79.16 |
| 1.2 | 0.0472 | 11.5 | 0.4527 | 81.99 |
| 1.0 | 0.0393 | 11.7 | 0.4606 | 84.87 |
| 0.8 | 0.0314 | 11.9 | 0.4685 | 87.79 |
Other Specifications according to your requirements.
Packing: Crimped wire mesh is packed in rolls,wrapped in moisture-proof paper or plastic film, outside wooden cases or wooden pallet.
|
|
Stainless Steel Single Intermediate Crimped Wire Mesh, 2 Mesh, 9-11mm Opening Images
|
